Matla a Pultrusion e Matla a Phahameng a FRP Corrosion e hananang le ho tima mollo
| Likaroloana: | Corrosion And Chemical Resistance, Ho Hanyetsa Mollo, Boima ba Leseli, Mofuthu, Motlakase o sa tsamaiseng motlakase | Boitsebiso: | FRP (Fiberglass e matlafalitsoe polasetiki) |
|---|---|---|---|
| Sebopeho: | Grating, tube, pole, handrail, poleiti, Ke Beam | Maemo: | Ncha |
| Mebala: | Botala, Bosootho, Bosoeu, Boputsoa le tse ling | Mofuta: | CR, XCR, VE |
| Leseli le Phahameng: |
Lits'oants'o tsa FRP Structural, profiles tse senotsoeng tsa FRP |
||
1. Lebitso la sehlahisoa: Bar ea FRP, lere la FRP, poleiti ea FRP, shaft ea FRP
2. Lintho tse tala: Glass fiber + resin
3. Mmala: 'mala o mong le o mong o teng
4. Setifikeiti: SGS, REACH
5. Khoebo: OEM / ODM
Sekala sa Kamehla
0.8 * 1.2 1.0 * 3.0 2.0 * 5.0 2.5 * 7.0 3.0 * 10.0 4.0 * 15.0 6.0 * 15.4
0.8 * 25.4 1.6 * 15.0 2.0 * 23.0 3.0 * 8.0 3.0 * 12.0 5.0 * 10.0 7.7 * 19
Ho paka le ho tlisa
Tlhahiso-leseling ea ho paka: sleeve sa carton / polasetiki
Tlhahisoleseling ea Tlhahiso: Pele ho feta matsatsi a 10 ka mor'a ho fumana tefo
Likaroloana:
1). Tekanyo e tlase: 67% ~ 74% ea aluminium
2). Matla a phahameng a Tenacity, le modulus
3). Khanyetso e Phahameng ea Corrosion
4). Resistance ea UV
5). Ts'ireletso ea motlakase
6). E sa Sebeliseng Thermally Le Motlakase
7). ho omella hoa meno
8). Bophahamo ba Boima
10). Tšebeliso e Meholo ea Thempara e Meholo
11). Karolo ea Consistent Cross
12). Tikoloho-tikoloho
Tšebeliso:
1) Mesebetsi ea kantle: Pole ea tente, thupa ea kite, shaft, ski pole, molamu oa ho ts'oasa litlhapi, thupa ea kolofo, seqha sa sekepe sa hockey, board board, skate board, shafts, liqha le metsu, liqha tsa golf, lithaele tsa kolofo, sekepe, kayak
2) Thulusi ea letsoho: sekhele sa mochini oa sekhele, molamu oa sekhele, molamu oa lesira, terata, mochini, mohala oa linyeoe le mekotla, antenna, li-antennas tsa CB, poleiti ea folakha, lithupa tsa kalafo ea oli, bolt, litepisi, lere . linyeoe tsa ts'ireletso bakeng sa lilaptop le iPhones
3) Toys: toy ea mohlala, likoloi tsa sefofane se sa reroang, koloi ea lebelo la formula-1
4) Koloi: lithupa tse holimo tsa makoloi, li-motor stator wedges, sebopeho sa koloi, litsupa tsa koloi, sephethe-phethe sa koloi, liforeimi tsa libaesekele, sefofane sa koloi, Microcar, kart, bodyshell
5) Pipe: likamore tsa metsi, metsi a mollo / metsi a futhumetseng / khase / metsi a nooang / Phala ea metsi a litšila
6) Ho aha: marulelo a marulelo, marulelo a bataletseng, likamore tse buletsoeng monyako, likamore tse mamati, lifensetere, lisebelisoa tsa ho sebetsana le lihlooho, lihlooho tse nang le li-keystones le sillcable ea ho matlafatsa, li-insulators, mokhanni oa cable, terata, antenna, transformer air duct spacer lithupa, likerese tse tšehetsang cable, switch switchators
Boitsebiso ba technical ofof pultruded FRP
|
||
|
Matla a tšepe |
680-850 |
Mpa |
|
Tensile Matla a Modulus |
35-45 |
Gpa |
|
Ho Reka Matla |
600-900 |
Mpa |
|
Ho Reka Modulus |
35-42 |
Gpa |
|
Matla a khatello |
300-390 |
Mpa |
|
Moqomo oa Matlafatso |
35-38 |
Gpa |
|
Matla a bosholu |
30-35 |
Mpa |
|
Tenacity e sa sebetseng |
500-550 |
Kj / m2 |
|
2. Thepa ea thepa |
||
|
Sekhahla sa Molumo |
> 1012 Ω.cm |
|
|
Kakaretso ea Resisction |
> 1012 Ω.cm |
|
|
Tumello |
3-5 |
|
|
Tahlehelo ea motsoako |
<0.05 |
|
|
Khefutso ea Voltage |
> 16 KV / mm |
|
|
Rescis ea Arc |
> 180 S |
|
|
3. Ho khutla ha mollo |
||
|
Bokaholimo bo ikhethang |
1.8-1.95 |
|
|
Barcol Hardness |
40-55 |
|
|
Index ea Oksijene |
28-32 |
|
|
Teko ea Kotsi ea Mollo |
Sekala sa V-0 |
|
|
Tlhokomeliso: lisebelisoa tse kaholimo tsa data: setsi sa polyester -phthalate, khalase ea fiber, tlhaiso-leseling ea motho ka mong e tsoa Setsing sa Tlhahlobo sa Composite sa Shanghai kamora tlhahlobo le kakaretso. |
||
